- wlug - University of Waikato Mail Lists

Benq Scanner S2W 4300U...
by Zed 01 Feb '10

01 Feb '10

Using LinuxMint v8.0 Helena. Some time go I purchased one of these scanners, after I found through http://www.buzzard.me.uk/jonathan/scanners-usb.html that they work with Linux, and downloaded and installed sane-backends-1.0.19 and sane-frontends-1.0.14 as suggested. Xsane is installed, also. However, when I clicked on XSane to launch the scanner the following error appeared: Failed to open device 'snapscan:libusb:001:002': Invalid argument. A search for snapscan:libusb:001:002 does not find it but a libusb command in the Terminal shows that it is installed. At that time, and this is over a year ago, I decided not to bother about it and abandoned the idea. However, I recently came back to the problem - after all why have a scanner sitting on the desk if it doesn't work :-). So, I downloaded the HowTo on your website http://www.wlug.org.nz/Benq3300/4300ScannerSetup and carefully followed the directions. Regrettably the scanner still does not work. When I first ran xSane, the window opened. Clicked on Preview and the scanner sprang into action - well, it made noises as if something was going to happen - and then the xSane window closed. Ran xSane again and got the error message: Failed to open device 'snapscan:lisusb:002:00': Error during device I/O Entered the Terminal and did lusb, with the following result zed@zed-desktop ~ $ lsusb Bus 002 Device 004: ID 04a5:20b0 Acer Peripherals Inc. (now BenQ Corp.) S2W 3300U/4300U Bus 002 Device 003: ID 046d:c517 Logitech, Inc. LX710 Cordless Desktop Laser Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 005: ID 05e3:0702 Genesys Logic, Inc. USB 2.0 IDE Adapter Bus 001 Device 004: ID 03f0:2f17 Hewlett-Packard EWS 2605dn Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub zed@zed-desktop ~ $ So, the Device is there but xSane is "throwing a wobbly" :( Opened the GIMP to use your suggestion that clicking on Acquire is the easiest way to get the scanner working but I cannot find Acquire in any of the menus in GIMP v2.6.7 >From time to time the scanner "chatters" to itself - the light comes on and flickers, becomes steady and then goes off. I don't know whether that is significant or not. I have searched Google for the error and although there are numerous entries none seem to apply to my problem. Any assistance would be much appreciated. Zed -- Zed Dogs crawl under Gates, software crawls under Windoze.

4 10

Benq Scanner S2W 4300U...
by Zed 01 Feb '10

01 Feb '10

Further to my earlier email, and the comments about the GIMP v2.6.7, a little further searching led me to the fact that it was necessary to go to File - Create - xSane - Device dialogue...snapscan:libusb:002:004. Clicking on this returns the I/O error. Zed -- Zed Diplomacy: The Vaseline of political intercourse

1 0

Trouble printing to a Fuji Xerox Workcentre 220
by Eric Light 30 Jan '10

30 Jan '10

Hi everyone, I've got a swanky new Fuji Xerox Workcentre 220. It's connected to my WinXP laptop via USB, which then shares it over Windows File & Print sharing to my network. For all connected Windows machines (x4) it's working fine. However for my EeePC (1005HA) running Ubuntu NBR 9.10, it won't print at all. There are no specific drivers for it. However the printer suggests that it does "PCL6/PostScript 3 Emulation", and I've tried both the Postscript and the PCL6 & PCL5e drivers. All of these choices make the printer warm up, but none of them actually end up in the printer printing anything. I've trawled the Internet, but may have been looking for the wrong thing. Does anyone have any suggestions? Cheers, - Eric

2 1

OpenSuSE DVDs
by Graham Lauder 30 Jan '10

30 Jan '10

I have some OpenSuSE 11.2 DVDs left over from the LCA Open Day if anyone wants one. They're dual layer DVD's and have both 64 and 32 bit versions and they can run both Gnome and KDE live sessions. As per usual for OpenSuSE DVDs it has Desktop, Server and Developer tools all on the DVD and no need for an internet connection to get a full production server or desktop or development environment up and running. (Nvidia Drivers for Compiz excepted) (Enlightment, XFCE and Windowmaker desktop environments also included) Put hand up and I'll bring some up to the next WLUG meeting, or I'll put them in the post if needed urgently! Cheers G -- Graham Lauder, OpenOffice.org MarCon (Marketing Contact) NZ http://marketing.openoffice.org/contacts.html OpenOffice.org Migration and training Consultant. Ambassador for OpenSUSE Linux on your Desktop INGOTs Assessor Trainer (International Grades in Office Technologies) www.theingots.org.nz

3 6

please remove
by Malcolm & Rosalie Heath 30 Jan '10

30 Jan '10

Please remove Malcolm Heath's email address from your address book as he passed away just before Christmas.

2 1

Re: [wlug] Anyone got blown AM2 motherboards going spare?
by jaytee＠clear.net.nz 30 Jan '10

30 Jan '10

I have a "AN50R" board 750 socket cpu with heat sink and a TWO screw plastic clamp if you are able to modify you are welcome to it. ----- Original Message Follows ----- > My CPU heatsink clamp (the shield on the motherboard) has > snapped. I'm looking for a blown motherboard that I can > remove the heatsink clamp from to replace it. > > I need the style that is held down by 4 screws through the > board into a rectangular shield on the underside of the > board. > > Can anyone help? > > > > -- > James Pluck > A Cruce Salus > > Pablo Picasso - "Computers are useless. They can only > give you answers." - > http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html > _______________________________________________ > wlug mailing list | wlug(a)list.waikato.ac.nz > Unsubscribe: > http://list.waikato.ac.nz/mailman/listinfo/wlug

2 1

Anyone got blown AM2 motherboards going spare?
by James Pluck 30 Jan '10

30 Jan '10

My CPU heatsink clamp (the shield on the motherboard) has snapped. I'm looking for a blown motherboard that I can remove the heatsink clamp from to replace it. I need the style that is held down by 4 screws through the board into a rectangular shield on the underside of the board. Can anyone help? -- James Pluck A Cruce Salus Pablo Picasso - "Computers are useless. They can only give you answers." - http://www.brainyquote.com/quotes/authors/p/pablo_picasso.html

1 0

Question-- Android LUG?
by Luke Hutchison 21 Jan '10

21 Jan '10

Does anyone know if there is a Google Android User Group in NZ? I have been hacking on the Linux kernel and Java events framework for Android (for example, I got multi-touch scaling working on the original G1 Android phone: http://bit.ly/16VDI ). Android is a fun stack to hack on at the operating system level, the Java framework level, and the app level. By the way, sorry for the spam but I have a brand-new extra Google Nexus One cellphone (with 1GHz Snapdragon processor and high-res OLED screen) here in NZ, please reply to me directly off-list if you are interested. Thanks, Luke Hutchison luke.hutch(a)gmail.com

2 1

LCA2010 live streams
by John Billings 19 Jan '10

19 Jan '10

Some of us are down here at LCA, but you can also watch sessions on the site here: http://www.lca2010.org.nz/programme/schedule/video Cheers, John

1 0

Backports
by Chris O'Halloran 13 Jan '10

13 Jan '10

Hello All, I am running Karmic Kooala Kubuntu 9.10 Recently I added the back-ports repository to install the latest version of Digikam and Amajoke, I mean Amarok. Well they both installed and then the update manager told mean about all the latest KDE goodness I could install so I upgraded. Well KDE-plasma now likes to hit 80-90% CPU usuage and is wearing out my cooling fans. Can I go back to a non-backports version of my machine? I still want ultimately to have the latest version of Digikam but revert everthing else, including Amarok to version 1.4 again. Is it a matter of disabling the backport repo and doing 'sudo apt-get upgrade' ? Any thoughts? Chris

2 2