- wlug - University of Waikato Mail Lists

Upcoming Fixit meeting (1 week today)
by Meeting Reminder bot 21 Jul '06

21 Jul '06

The WLUG Fixit Meeting is 1 week away. ---------------------------------------------------------------------- The Saturday after our Monday meeting BruceKingsbury will be holding a 'Saturday Workshop' where you can bring your machine along and we'll try to resolve any problems you might have. <pre> Date: July 29 Time: 11am - 4pm Location: 23 Oxford St (http://zoomin.co.nz/hamilton/hamilton/oxford+street/23) </pre> Facilities available; 256k internet (cat5 or wifi), phone line, Broadcast TV for myth, ISO's of ubuntu and kubuntu, spare power leads, tables, BBQ

1 0

FW: Openswan and Cisco PIX
by Craig Box 20 Jul '06

20 Jul '06

Here's a question I've received, relating to a wiki page, that I can't answer. Anyone got any ideas? Craig _____ From: Jason Romo [ <mailto:jromo@networkguardian.net]> mailto:jromo@networkguardian.net] Sent: Wednesday, 19 July 2006 11:43 p.m. To: Craig Box Subject: Openswan and Cisco PIX I used your online document and I have a tunnel between the openswan 2.4.5 (using netkey with 2.6.16 kernel) and a Cisco PIX 501. I see the link is up on both sides. I ping the cisco's internal IP and I see the ICMP via debug icmp trace, but I don't get a resonse. I am not sure what is wrong. I think it is on the cisco side. It doesn't seem to allow traffic to the internal network. Any ideas where to start. _____ From: Craig Box Date: Thu, 20 Jul 2006 08:49:57 +1200 To: 'Jason Romo' <jromo(a)networkguardian.net> Subject: RE: Openswan and Cisco PIX Hi Jason, Haven't done anything with either a Swan or a Cisco for a long time sorry. Seen http://www.wlug.org.nz/FreeSwanToCiscoPix#footnote-3 ? Does this apply to you? Regards Craig _____ From: Jason Romo [mailto:jromo@networkguardian.net] Sent: Thursday, 20 July 2006 9:12 a.m. To: Craig Box Subject: Re: Openswan and Cisco PIX I copied the config to another machine and it works fine to the same cisco box on the remote end. I wonder if the upstream cisco route is filtering or something. But they can access anything on our network and we respond. But I can't initiate the traffic. I have checked that the firewall rules are good, routes, even kernel modules. I can't find a problem. They look the same. The system is the system it is an image of the exact box. Any ideas? Thanks for your help, Jason Romo

1 0

REMINDER: WLUG meeting is on Monday
by Meeting Reminder Bot 20 Jul '06

20 Jul '06

There's a Waikato Linux Users Group meeting on Monday: ---------------------------------------------------------------------- Our July guest is Roger de Salis, a director of http://www.wlug.org.nz/FxNetworks. FX Networks are a http://www.wlug.org.nz/Wellington company with significant http://www.wlug.org.nz/Unix and http://www.wlug.org.nz/Cisco Networking experience. The principals of FX have over 50 years experience in the IT and Telecommunications industry, the bulk of which is about continuously available on-line systems for public use. They specialise in bringing interesting technical ideas to market. FX believe you should be able to get connectivity far greater than what is currently available in New Zealand, and have made great investment in a fibre network around New Zealand. They're also pioneers in the use of http://www.wlug.org.nz/VoIP. If you're interested in the InterNet or telephone calls, this is a meeting not to be missed!

1 0

Meeting minutes & discussion topics
by Craig Box 20 Jul '06

20 Jul '06

The minutes of our committee meeting are now up at http://www.wlug.org.nz/CommitteeMeetingTopics.2006-07-20 (when the meetings are at my house, I can take them live to the internet a lot easier!) We regret to announce the resignation of Gian Perrone from the WLUG committee, effective immediately. A replacement member will not be sought as we are due to have an AGM in a couple of months. A couple of questions for our community.. - Are you interested in helping out on our advocacy display on September 16? We expect to have a stand with PCs, demos and giveaways running at Centreplace. If you are available, or want to help organise the event, please add your name to http://www.wlug.org.nz/MeetingTopics.2006-09-16. - If WLUG held Linux training, would you be interested in attending? What would you want to learn? Would you, or your employer, pay, especially if there was the possibility of gaining a certification at the end of it? We also think that Hamilton needs a Thursday Night Curry, and if you bug us enough, we might just book a Thursday for it! Craig

1 0

Audio sub-systems on Linux
by Ian McDonald 20 Jul '06

20 Jul '06

I notice that Craig discusses these a bit on his latest blog at: http://craig.dubculture.co.nz/blog/2006/07/20/audio-on-ubuntu/ Craig - can you (or anyone else?) explain to me how Jack fits into all of this? Jack is mentioned at: http://jackit.sourceforge.net/docs/faq.php http://jackaudio.org/ I've seen quite a bit of mention of Jack around the place (as well as GStreamer) and haven't noticed PulseAudio much at all. It seems clear that OSS is going away and what Craig says about ESD makes sense as well... Now Alsa is at the kernel level for devices and doesn't seem to face any real competition. How do the other bits fit togther though? Ian (trying to stimulate some discussion - I could read this all up myself but it'd be boring..) -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

3 4

Building a WPA2 access point
by Ian McDonald 20 Jul '06

20 Jul '06

Interesting article here at linux.com: http://www.linux.com/article.pl?sid=06/07/10/1729226 -- Ian McDonald Web: http://wand.net.nz/~iam4 Blog: http://imcdnzl.blogspot.com WAND Network Research Group Department of Computer Science University of Waikato New Zealand

1 0

SCO OpenServer 5
by zcat 19 Jul '06

19 Jul '06

If anyone has the install disk(s) for SCO OpenServer, I would be very interested in getting hold of them. I'm trying to migrate someone from a legacy system to Linux and it would be very handy (almost essential!) to set up a mirror of their current server to work with.

2 3

router disconnecting
by Haldor Riddering 19 Jul '06

19 Jul '06

Hi people, okay I had a big crash and lost loads of data in windows plus system got trashed so decided to give ubuntu dapper a go on my laptop. no worries after much hacking away got everything working how I want it. now however there is a problem. I have a dlink dsl-302g modem. now whenever I run the laptop after a few minutes the router disconnects then reconnects and this happens again and again whenever the laptop is on. it doesn't happen with my windows machines and if I turn the laptop off the connection is constant for 24+ hours. I emailed the slingshot help desk and they say it's a line fault and it's going to cost $88 to have it looked at. but it only happens when the laptop is on the network. any ideas about whats happening here? I'm very happy with ubuntu, just frustrated with the disconnects. I have tried a second dsl-302g so it's not the router and the internal network works flawlessly just the internet connection is screwy. Cheers Haldor

1 0

Warren Hughes (IBM) is travelling.
by Warren Hughes 19 Jul '06

19 Jul '06

I will be out of the office starting 19/07/2006 and will not return until 24/07/2006. Hi, thanks for your email. I'm out of the office until Monday 24/7. I will be checking my voicemail and email. Cheers, Warren

1 0

Local Linux training
by Eric Light 19 Jul '06

19 Jul '06

Hi all, My name is Eric, I've been following this list for about two years now but haven't had occasion to actually make a post until now... I've been looking for a training institute which offers a course towards the CompTIA Linux+ certificate. I was offered a scholarship in Auckland for such a course, but I'm really looking for somewhere in Hamilton. My experience with Linux is minimal - I've installed a few older versions of Mandrake in the past, and more recently got most of a server going with Ubuntu. But I still honestly don't really know what I'm doing, and most of the time I rely on programs which feature a GUI. I'd like to get away from that. I've called Hamilton Business School (http://www.hbsc.co.nz/index.asp?PageID=2145824273) who seem to be the only ones in Hamilton offering the course, but their Linux tutor has recently left the company and so they're not offering the course at the moment. Does anyone know of a Hamilton training provider where I could do something along the lines of a 20-week course via Student Loan? Thanks in advance, - Eric Light

2 1