Would people be keen on an MPLS workshop with no-name switches powered by openflow?


On Fri, Nov 2, 2012 at 9:51 AM, Jonathon Exley <Jonathon.Exley@kordia.co.nz> wrote:
A hands-on workshop would be kinda cool

Jonathon

-------------
From: nznog-bounces@list.waikato.ac.nz [mailto:nznog-bounces@list.waikato.ac.nz] On Behalf Of Sam Russell
Sent: Thursday, 1 November 2012 6:14 p.m.
To: Josh Bailey
Cc: nznog@list.waikato.ac.nz; Andy Linton
Subject: Re: [nznog] Andy Linton is now an OpenFlow expert

I guess we all know who's doing the OpenFlow presentation at NZNOG2013 then :)

Sent from my iPhone

On Nov 1, 2012, at 5:23 PM, Josh Bailey <joshb@google.com> wrote:
It took 2h.

About 30m to make an OpenFlow controller PC out of bunch of trash, and boot my controller DVD. "ed" wasn't available on my controlled DVD so I made Andy use nano to configure it. That slowed us down quite a bit.

90m to put OpenFlow firmware on a 3780 switch, including walking up and down the hill to VUW get 1G SFPs. 

So if you have any questions about whether OpenFlow/SDN works/forwards packets in hardware - ask Andy. He knows. And has a live CD controller.



_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog
This email and attachments: are confidential; may be protected by privilege and copyright; if received in error may not be used, copied, or kept; are not guaranteed to be virus-free; may not express the views of Kordia(R); do not designate an information system; and do not give rise to any liability for Kordia(R).

_______________________________________________
NZNOG mailing list
NZNOG@list.waikato.ac.nz
http://list.waikato.ac.nz/mailman/listinfo/nznog



--
Sam Russell

Network Engineer
Research & Education Advanced Network NZ Ltd
ddi: +64 4 913 6365
mob: +64 21 750 819
fax: +64 4 916 0064

http://www.reannz.co.nz