AS far as I can see from the MLX datasheet, 64,000 RSVP-TE LSPs are supported
From: nznog-bounces(a)list.waikato.ac.nz [mailto:email@example.com] On Behalf
Of McDonald Richards
Sent: Tuesday, 4 June 2013 12:30 PM
Subject: Re: [nznog] Another Brocade question for my favorite mailing list
CES/CER can handle 1000 LSPs (lsp tunnels) before they stop making new ones. This can be
an issue if you're letting your entire Cisco LDP domain pollute them. MLX would be a
good order of magnitude larger but I don't have a specific figure.
Have tested and used MTUs of 9000+ for VLL with no issues.
Have tested and used MTUs of 4000+ for VPLS with some issues although this is the smaller
CES platform and there may have been some feature gap in the Ironware version I was using
at the time (MLX will have more features around this).
QinQ works fine if you do port mode VLLs. Also have tested it working in a "raw"
VPLS environment (port mode again). In case that's not clear, port mode would be where
you have all client ports as untagged.
Raw mode every time if you ever want to do inter-op. This will set the VC-type to 5 and
indicates that the port is transparent - from memory Cisco have this as a default in IOS.
From: Sam Russell <firstname.lastname@example.org<mailto:email@example.com>>
Date: Tuesday, 4 June 2013 12:05 PM
Subject: [nznog] Another Brocade question for my favorite mailing list
The interop stuff was a resounding success, and the details are at
anyone is interested.
I'm now trying to engineer it so we can add Juniper devices while changing as little
Brocade config as possible. Can anyone help me with the following questions:
- How many LSPs can a Brocade MLX4/MLX8 handle before it falls over? We have a mesh of 15
chassis, and the output of "show mpls memory" looks like this:
Mem-Type Alloc BytesAlloc TotalAlloc TotalFree AllocPeak AllocFail FreeFail
LSP 28 25760 369 341 28 0 0
Does this mean that it's full? The documentation is sparse, I'm hoping someone
else has gone down that rabbit hole and found an answer for me :)
- What MTU are people using for VLL/VPLS?
- Has anyone got QinQ working with VLL/VPLS on a Brocade?
- Does anyone have a preference for raw mode vs tagged mode for VLL and VPLS?